TM 5-3805-254-20-2
HEADLIGHT ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Use care when removing damaged headlight assembly, broken glass or sharp metal could cut you.
NOTE
Steps given are typical for both left and right headlight assemblies.
To remove lamp only perform steps 1 thru 4.
1.
Fender (1)
Bezel (2) and
a.
Using number one cross-tip screw-
screw (3)
driver, unscrew and take out screw.
b.
Lift up and take off bezel.
NOTE
Hold retaining ring, lamp, and adjustment basket in place when performing step 2.
2.
Ring (4)
Spring (5)
Using 6-inch longnose pliers, unhook and
take off.
3.
Fender basket (6)
Ring (4), lamp (8),
a.
Lift up from fender basket recess.
and two adjustment
and adjustment
b.
Take out and hold.
screws (7)
basket (9)
c.
Lift up and take off retaining ring.
4.
Connector (10)
Lamp (8) and ad-
a.
Pull apart and take out lamp.
justment basket (9)
b.
Take out adjustment basket.
5.
Underfender(11)
Connector (12)
Pull apart.
6.
Fender basket (6)
Harness (13)
Using 3/16-inch flat-tip screwdriver, pry
out.
2-808
