TM 5-3805-254-20-2
HEADLIGHT ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
21.
Adjustment basket
Ring (3)
Aline tongue of adjustment basket with slot of
(1) and lamp (2)
ring, push down and snap in place.
22.
Fender basket (4)
Ring (3), lamp (2),
Put adjustment basket tabs into adjustment
and two adjustment
and adjustment
screw slots, push down and hold.
screws (5)
basket (1)
23.
Ring (3)
Spring (6)
Hook through hole in ring.
24.
Fender (7)
Bezel (8)
a.
Put tongue of bezel into slot of fender
and screw (9)
basket (4), push down and hold.
b.
Screw in and tighten using number one
cross-tip screwdriver.
ALINEMENT
NOTE
This procedure should only be performed when alinement tool or screen is not available.
Headlight alinement must be performed on level surface with wall at one end and in
shaded area.
TA244211
2-812
