TM 5-3805-254-20-2
HEADLIGHT ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ALINEMENT - CONTINUED
33.
Under right
Connector (2)
Pull apart to disconnect lamp (3).
fender (1)
34.
Left fender
Bezel (5) and
a.
Using number one cross-tip screw-
basket (4)
screw (6)
driver, unscrew and take out screw.
b.
Lift up and take off bezel.
35.
Wall (7)
Two adjustment
Using number one cross-tip screwdriver,
screws (8)
turn until center of brightest part of headlight
is where lines (9 and 10) cross.
36.
Right fender (1)
Connector (2)
Push together.
37.
Left fender
Bezel (5) and
a.
Put tongue of bezel into slot of fender
basket (4)
screw (6)
basket, push down and hold.
b.
Screw in and tighten using number one
cross-tip screwdriver.
TA244214
2-816
