TM 5-3805-254-20-2
HEADLIGHT ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ALINEMENT - CONTINUED
NOTE
Have assistant drive truck while you direct him.
26.
Lines (1, 2, and 3)
Truck (4)
Using lines (1 and 2) to guide driver, park
truck so the center of each front wheel is
directly over line (3) and tires are evenly
placed on lines (1 and 2).
27.
Wall (5)
Lamps (6 and 7)
Using 50-foot tape measure, check dis-
tance between lamps and wall.
Move truck to plus or minus 1/2-inch
(1.27 cm).
28.
Truck (4)
Ten tires (8)
Check for correct inflation (page 1-20).
29.
Wall (5)
Lines (9 and 10)
a.
Using chalk and carpenter’s square,
draw lines (9 and 10) 3-feet 9 1/4-
inches (1.15 m) straight up from marks
(11 and 12) and make marks (13 and
14) at end of lines (9 and 10).
b.
Using chalk and 50-foot tape measure,
extend lines (9 and 10) 1-foot (.3 m).
30.
Line (15)
Using chalk and 50-foot tape measure, draw
line (15) between marks (13 and 14) and
extend 1-foot (.3 m) at both ends.
2-814
