TM 5-3805-254-20-2
HEADLIGHT ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-424).
Replace all damaged or defective parts.
9.
Bezel (1), ring (2),
Look for bends, breaks or corrosion.
adjustment basket (3),
and fender basket (4)
10.
Fender basket (4)
Spring (5)
a.
Look for loose rivet.
b.
Look for straightened or broken coils.
11.
Two adjustment
a.
Look for cracks or breaks.
screw sockets (6)
b.
Look for loose rivets.
12.
Two adjustment
Look for worn slot or bent shank.
screws (7)
13.
Adjustment
Adjustment tabs (8)
Look for bends, breaks or corrosion.
basket (3)
and tongue (9)
14.
Harness (10)
Grommet (11)
Look for cracks, tears or worn groove.
15.
Two connectors (12)
Look for cracks, breaks or corroded ends.
and (13)
INSTALLATION
NOTE
Steps given are typical for both left and right headlight assemblies.
To install lamp only perform steps 21 thru 24.
Install fender basket with harness grommet hole in 12 o’clock position.
2-810
