TM 5-3805-254-20-2
UPPER INSTRUMENT PANEL OPTICAL RIBBON - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
11. Front trim panel
Cover plate (2)
Put in place.
head retainer (1)
12. Cover plate (2) to
Six screws (3)
Screw in and tighten using number one
front trim panel
cross-tip screwdriver.
head retainer (1)
13. Optical light
Optical ribbon (5)
Push in.
assembly (4)
14. Lower center instru-
Two screws (7) and
a. Put bracket in place.
ment panel (6)
bracket (8)
b. Screw in and tighten using number one
cross-tip screwdriver.
15.
Power take off
a. Put in place.
control (9), two
b. Screw in and tighten using two 7/16-inch
screws (10), two
box-end wrenches.
flat washers (11),
two new lockwashers
(12), and two
nuts (13)
TA244256
2-876
