TM 5.3805-254-20-2
TRANSMISSION OIL PAN - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
2
Shift control Cotter pin (2)
a
Using 8-inch roundnose pliers,
swivel lever (1)
straighten ends and pull out.
b
Get rid of.
3.
Two flat washers (3)
Take off.
and shift cable
swivel (4)
4
Transmission
Two screws (6), two a
Using 112-inch, 112-inch drive socket,
oil pan (5)
lockwashers (7), shift
10-inch extension, and ratchet handle,
cable bracket (8), and
unscrew and take out.
two spacers (9)
Move shift cable bracket out of way.
b
Get rid of lockwashers.
NOTE
Assistance will be needed when performing steps 5 and 6.
5.
Twenty-one a
Have assistant hold transmission oil pan
screws (10)
in place.
b
Using 112-inch, 1/2-inch drive socket,
10-inch extension, and ratchet handle,
unscrew and take out.
NOTE
Care must be taken not to tilt transmission oil pan to prevent oil from spilling.
6.
Transmission oil
a
Take off.
pan (5) and oil pan
b
Drain oil.
gasket (11)
c
Get rid of drained oil (page 2-424).
d
Take off gasket.
e
Get rid of gasket.
2-902
