TM 5-3805-254-20-2
STARTER MOTOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
6
Starter motor (1
Screw (2) and
a
Using 9/16-inch half-moon wrench,
lockwasher (3)
unscrew and take out.
b
Get rid of lockwasher.
WARNING
Due to excessive weight, care must be taken to prevent personal injury or damage to equipment.
NOTE
Have assistant support starter motor.
7.
Two screws (4) and
a
Using 15116-inch box-end wrench,
two lockwashers (5)
unscrew and take out.
b
Get rid of lockwashers.
c
With assistance, pull starter motor for-
ward, down, and out of chassis.
INSTALLATION
8
Starter motor
Ground wire (7)
Put in place.
solenoid (6)
9.
Screw (8)
Tighten using 1/4-inch flat-tip screw-
driver.
WARNING
Due to excessive weight, care must be taken to prevent personal injury or damage to equipment.
10 Starter motor (1)
Screw (2) and new
a
With assistance, put starter motor in
lockwasher (3)
lace.
b
Screw in and tighten using 9/16-inch
half-moon wrench.
11.
Two screws (4) and
Screw in and tighten using 15/16-inch box-
two new lock-
end wrench.
washers (5)
12.
Nut (9), new lock-
a
Put ground wire and two ground straps in
washer (10), ground
place.
wire (7), and two
b
Screw on and tighten using 3/4-inch
ground straps (11)
box-end wrench.
2-898
