TM 5-3805-254-20-2
STARTER MOTOR
This task covers:
a.
Removal (page 2-896)
b.
Installation (page 2-898)
INITIAL SETUP
Tools
Personnel Required
Screwdriver, flat-tip, 1/4-inch
Two
Wrench, box-end, 3/4-inch
Wrench, box-end, 15116-inch
Equipment Condition
Wrench, half-moon, 9/16-inch
Battery cables disconnected (page 2-424).
Materials/Parts
Rear engine cover removed (page 2-1270).
Lockwasher, starter motor mounting
(three required)
Lockwasher, solenoid ground
Lockwasher, starter motor ground
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
For more information on how to tag parts, go to General Maintenance Instructions (page 2-424).
1. Starter motor
Nut (2), lockwasher
a. Tag wires.
solenoid (1)
(3), and four
b. Using 314-inch box-end wrench, un-
wires (4)
screw and take off.
c. Get rid of lockwasher.
d. Take off four wires.
2.
Screw (5) and
a. Tag wire.
wire (6)
b. Using 1/4-inch flat-tip screwdriver,
loosen.
Do not take out.
c. Take off wire.
2-896
