TM 5-3805254-20-2
STARTER MOTOR - CONTINUED
13. Starter motor
Screw (12) and
a. Put wire in place.
solenoid (6)
wire (13)
b. Tighten using 1/4-inch flat-tip screw-
driver.
14.
Nut (14), new lock-
a. Put four wires in place.
washer (15), and
b. Screw on and tighten using 3/4-inch
four wires (16) box-end wrench.
NOTE
FOLLOW-ON MAINTENANCE:
1. Install rear engine cover(page2-1270).
2. Connect battery cables (page 2-424).
TASK ENDS HERE
TA244269
2-899
