TM 5-3805-254-20-2
AUXILIARY TRANSMISSION
This task covers:
a.
Oil Level Check (page 2-932)
c.
Filling (page 2-934)
b.
Draining (page 2-933)
_
INITIAL SETUP
Tools
Personnel Required
Container, 10-gallon
One
Goggles, safety
Key, square, 112-inch
Equipment Condition
Pump, lubricating, bucket
Wrench, open-end, 15116-inch
Truck on level ground.
Materials/Parts
References
Oil, lubricating (item 14, appendix C)
LO 5-3805-254-12 (Lubrication Order)
Rags, wiping (item 15, appendix C)
TM 5-3805-254-10 (Operator’s Manual)
Tape, antiseizing (item 22, appendix C)
ACTION
LOCATION
ITEM
REMARKS
OIL LEVEL CHECK
WARNING
Safety goggles must be worn when working under truck to prevent eye injury.
Do not check oil level when hot. Hot oil can burn you.
1.
Auxiliary
Filler plug (2)
a.
Wipe filler plug and area around it, clean
transmission (1)
using wiping rag.
b.
Using 15/16-inch open-end wrench,
unscrew and take out.
2.
Auxiliary
Insert finger through filler plug hole.
transmission (1)
If oil is up to filler plug hole, oil is at
proper level. Go to step 6. If oil is
below filler plug hole, oil must be
added. Go to step 4, 5 and 6.
2-932
