TM 5-3805-254-20-2
REMOTE OIL FILTER CARTRIDGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Safety goggles must be worn when working under truck to prevent eye injury.
Hot transmission oil can burn you. Care must be taken to prevent personal injury.
1.
Remote oil
Drainplug (2)
a.
Place 10-gallon container underneath.
filter (1)
b.
Using 7/16-inch box-end wrench, un-
screw and take out.
c.
Allow oil to drain.
d.
Get rid of drained oil (page 2-424).
NOTE
Hold oil filter canister while performing next step.
2.
Retaining screw (3)
Using 1 118-inch box-end wrench, unscrew
and loosen.
Retaining screw remains in oil filter
canister.
3.
Oil filter canister
a.
Take off.
(4) and ring (5)
b.
Get rid of ring.
4.
Oil filter
Oil filter
a.
Take out.
canister (4)
cartridge (6)
b.
Get rid of.
CLEANING
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective safety goggles and gloves
and use only in a well-ventilated area. Avoid contact with skin, eyes, and clothes and do not
breathe vapors. Do not use near open flame or excessive heat. The flashpoint for type #1
drycleaning solvent is 1000F (380C) and for type #2 is 138°F (590C). If you become dizzy while
using cleaning solvent, get fresh air immediately, and get medical aid. If contact with eyes is
made, flush your eyes with water and get medical aid immediately.
Safety goggles must be worn when using wire brush. Flying rust and metal particles can cause
eye injury.
2-936
