TM 5-3805-254-20-2
FRONT BRAKES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
Steps given are typical for right and left front brakes.
8
Brake spider (1)
Four brakeshoe
Coat with thin layer of grease.
rest pads (2)
Wipe off excess.
9
Two adjusting
Turn until fully closed.
screw rings (3)
Do not tighten.
CAUTION
Make sure hands are free of grease when handling brakeshoes to prevent grease from getting on linings.
NOTE
Position brakeshoes on brake spider with DRUM ROTATION stamping facing out and arrows facing forward
direction of wheels.
10
Brake spider (1)
Upper brakeshoe (4)
Position behind upper holddown clip (5) and
into slots of both adjusting screw rings (3).
11
Lower brakeshoe (6)
Position behind lower holddown clip (7)
and up into slots of both adjusting screw
rings (3).
WARNING
Brake springs under tension can injure or kill Use extreme care to prevent injury Safety goggles must be worn.
NOTE
Hold upper and lower brakeshoes together when performing next step.
2-952
