TM 5-3805-254-20-2
FRONT REAR T-FITTING TO SERVICE AIRBRAKE CHAMBER HOSES - CONTINUED
INITIAL SETUP:
Tools
Materials/Parts - Continued
Gloves, safety
Rags, wiping (item 15, appendix C)
Goggles, safety
Solvent, drycleaning (item 19, appendix C)
Wrench, box-end, 7/16-inch
Tags, marker (item 21, appendix C)
Wrench, open-end, 7/16-inch
Tape, antiseizing (item 22, appendix C)
Wrench, open-end, 5/8-inch
Wrench, open-end, 3/4-inch
Personnel Required
Materials/Parts
One
Detergent, liquid, GP (item 7,
Equipment Condition
appendix C)
Lockwasher, clamp screw
Airbrake system drained (page 2-1034).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Safety goggles must be worn when working under truck to prevent eye injury.
NOTE
Tag airhoses to ensure correct installation.
For more information on how to tag parts, go to General Maintenance Instructions (page 2-424).
1.
Front rear
Right airhose (2)
Tag.
T-fitting (1)
and left airhose (3)
2.
Line nut (5) and
Using 3/4-inch open-end wrench, unscrew
45-degree elbow (4)
and take off.
3.
Line nut (7) and
Using 3/4-inch open-end wrench, unscrew
45-degree elbow (6)
and take off.
4.
Right service air-
Line nut (10) and
Using 3/4-inch and 5/8-inch open-end
brake chamber (8)
fitting (9)
wrenches, unscrew and take off.
Change 1 2-1094
