TM 5-3805-254-20-2
FRONT REAR T-FITTING
This task covers:
a.
Removal (page 2-1093.0)
b.
Installation (page 2-1093.0)
INITIAL SETUP:
Equipment Conditions
Materials/Parts
Front rear T-fitting to service airbrake chamber
Lockwasher, T-manifold (two required)
hoses disconnected (page 2-1093.1).
Front relay valve to front rear T-fitting hose discon-
Personnel Required
nected (page 2-1099).
One
Tools/Test Equipment
Goggles, safety
Wrench, box-end, 7/16-inch
Wrench, open-end, 7/16-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Safety goggles must be worn when working under truck to prevent eye injury.
1.
Front rear
Two nuts (2),
a
Using 7/16-inch open-end wrench and
7/16-inch
T-fitting (1)
lockwashers (3),
box-end wrench, unscrew, and take off.
and screws (4)
b
Get rid of lockwashers.
Front rear quick release valve (5)
is also removed.
2.
Bracket (6)
Front rear
Take off.
T-fitting (1)
INSTALLATION
3.
Bracket (6)
Front rear
Put in place.
T-fitting (1)
4.
Front rear
Two nuts (2), new
Screw in and tighten using 7/16-inch box-end
T-fitting (1)
lockwashers (3),
wrench and 7/16-inch open-end wrench.
and screws (4)
Front rear quick release valve (5)
is also Installed.
Change 1 2-1093.0
