TM 5-3805-254-20-2
RIGHT FRONT WHEEL TO FRONT BRAKE LIMITING AND QUICK RELEASE VALVE HOSES -
CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
33.
Front brake limiting
Fitting (2)
Wrap pipe threads with antiseizing tape.
and quick release
valve (1)
34.
Fitting (2) and
Screw on and tighten using 1-inch and 7/8-
airhose (3)
inch open-end wrenches.
35.
Left frame rail (4)
Airhose (3)
Route.
to right frame
rail (5)
36.
Right frame rail (5)
90-degree elbow (6)
Wrap pipe threads with antiseizing tape.
37.
90-degree elbow (6)
Airhose (3)
a.
Screw on and tighten using 1-inch open-
end wrench.
b.
Takeoff tag.
c.
Get rid of tag.
NOTE
Steps 38 and 39 are typical for three clamp assemblies.
38.
Airhose (3)
Clamp (7)
Put on.
39.
Right frame rail (5)
Clamp (7), screw
a.
Aline holes.
and front cross-
(9), new lockwasher
b.
Screw in and tighten using 7116-inch
member (8)
(10), and nut (11)
box-end and 7/16-inch open-end
wrenches.
40.
Right frame rail (5)
Fitting (12)
Wrap pipe threads with antiseizing tape.
41.
Fitting (12)
Airhose (13)
Screw on and tighten using 3/4-inch and
11/16-inch open-end wrenches.
42.
Bracket (14)
Fitting (15)
Wrap pipe threads with antiseizing tape.
Change 1 2-1128
