TM 5-3805-254-20-2
REAR REAR QUICK RELEASE VALVE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
2.
Bracket (1)
Rear rear quick
Take off.
release valve (2)
INSTALLATION
NOTE
Steps 3 and 4 are typical to install only one or both quick release valves.
3.
Bracket (1)
Rear rear quick
Put in place.
release valve (2)
4.
Rear rear quick
Two nuts (3), new
Screw in and tighten using 7/16-inch box-end
release valve (2)
lockwashers (4),
wrench and 7/16-inch open-end wrench.
and screws (5)
NOTE
FOLLOW-ON MAINTENANCE: Connect parking and service airbrake hoses as required (page 2-1131, 2-
1136, 2-1140.3, and 2-1157).
TASK ENDS HERE
TA702164
Change 1 2-1130.2
