TM 5-3805-254-20-2
FRONT BRAKE LIMITING CONTROL VALVE HOSES AND FITTINGS - CONTINUED
INITIAL SETUP
Tools
Materials/Parts - Continued
Gloves, safety
Rags, wiping (item 15, appendix C)
’
Goggles, safety
Solvent, drycleaning (item 19, appendix C)
Wrench, box-end, 7/16-inch
Tags, marker (item 21, appendix C)
Wrench, open-end, 7/16-inch
Tape, antiseizing (item 22, appendix C)
Wrench, open-end, 1/2-inch
Wrench, open-end, 9/16-inch
Personnel Required
Wrench, open-end, 1-inch
Wrench, open-end, 1 1/8-inch
Two
Materials/Parts
Equipment Condition
Detergent, liquid, GP (item 7,
Airbrake system drained (page 2-1034).
appendix C)
Left side hood panel opened (page 2-424).
Lockwasher, anchor coupling (two
Air cleaner removed (page 2-446).
required)
Left side cab door opened (page 2-424).
Lockwasher, clamp screw (two required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Safety goggles must be worn when working under truck to prevent eye injury.
NOTE
Tag airhoses to ensure correct installation.
For more information on how to tag parts, go to General Maintenance Instructions (page 2-424).
1
Front brake limiting
Airhose (2)
Tag.
control valve (1)
2
Line nut (4) and
Using 9/16-inch open-end wrench, un-
90-degree elbow (3)
screw and take off.
3
T-fitting (5)
Line nut (6) and
a
Using 9/16-inch open-end wrench, un-
airhose (2)
screw and take off.
b
Take out airhose.
4
Front brake limiting
Airhose (7)
Tag.
control valve (1)
Change 1 2-1160
