TM 5-3805-254-20-2
FRONT BRAKE LIMITING CONTROL VALVE HOSES AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
-_
12
Driver’s side of
Fitting (2)
Using 7/16-inch box-end wrench, unscrew
firewall (1)
and take out.
13
Engine side of
90-degree elbow (4)
Using 1/2-inch open-end wrench, unscrew
firewall (3)
and take out.
NOTE
Assistance will be needed when performing step 14.
14
Driver’s side of
Nut (5), two lock-
a
Using 1 1/8-inch and 1-inch open-end
firewall (1) and
washers (6), and
wrenches, unscrew and take out.
engine side of
anchor coupling (7)
b
Get rid of lockwashers.
firewall (3)
CLEANING
WARNING
Drycleaning solvent P-D-680 is toxic and flammable Wear protective safety goggles and gloves and use only in a well-
ventilated area Avoid contact with skin, eyes, and clothes and do not breathe vapors Do not use near open flame or
excessive heat The flashpoint for type #1 drycleaning solvent is 1000F (380C) and for type #2 is 138°F (590C) If you
become dizzy while using cleaning solvent, get fresh air immediately, and get medical aid If contact with eyes is made,
flush your eyes with water and get medical aid immediately.
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-424).
15
Three airhoses
Clean using liquid detergent and wiping rag.
16
All metal parts
Clean using drycleaning solvent and wiping
rag.
2-1162
