TM 5-3805-254-20-2
Section XV. WHEEL, TIRE, HUB AND DRUM MAINTENANCE
Page
Page
Front Hub and Brakedrum
Rear Hub and Brakedrum Assembly
Assembly and Wheel Bearings ................ 2-1175
and Wheel Bearings.......................... 2-1188
Front Wheel .............................................. 2-1168
Rear Wheel ....................................... 2-1171
FRONT WHEEL
This task covers:
a
Removal (page 2-1168)
c
Installation (page 2-1169)
b
Disassembly/Repair/Assembly
(page 2-1169)
INITIAL SETUP
Tools
Equipment Condition
Handle, hinged, 3/4-inch drive
If air pressure gage shows less than normal
Socket, 1 112-inch, 3/4-inch drive
pressure, start dump truck to build up
Truck, wheel, lift
air pressure Shut down when air
Wrench, torque, 0 to 600 ft lb
pressure builds up to between 90 and
(0 to 814 N.m)
125 psi (TM 5-3805-254-10).
Dump truck jacked and supported
Personnel Required
(page 2-424).
Two
References
TM 9-2610-200-14 (Tire Manual)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Steps given are typical for right and left front wheels.
Assistant must apply dump truck brakes to allow loosening of lug nuts.
Lug nuts on right side of dump truck have right-hand threads and lug nuts on left side of
dump truck have left-hand threads.
Change 1 2-1168
