TM 5-3805-254-20-2
REAR WHEEL
This task covers:
a
Removal (page 2-1171)
c
Installation (page 2-1173)
b
Disassembly/Repair/Assembly
(page 2-1172)
INITIAL SETUP
Tools
Equipment Condition
Handle, hinged, 3/4-inch drive
If air pressure gage shows less than normal
Socket, square, 13/16-inch, 3/4-
pressure, start dump truck to build up air
inch drive
pressure Shut down when air pressure
Wrench, torque, 0 to 600 ft lb
builds up to between 90 and 125 psi.
(0 to 814 N.m)
(TM 5-3805-254-10).
Socket, 1 1/2-inch, 314-inch drive
Dump truck jacked and supported
Truck, lift, wheel
(page 2-424).
Personnel Required
References
Two
TM 9-2610-200-14 (Tire Manual)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Steps given are typical for right and left front rear and rear rear wheels.
Engage parking brake (TM 5-3805-254-10) or have assistant apply dump truck brakes to allow loosening of lug nuts
and wheel studs.
Lug nuts and wheel studs on right side of dump truck have right-hand threads and lug nuts and wheel studs on left
side of dump truck have left-hand threads.
Change 1 2-1171
