TM 5-3805-254-20-2
REAR WHEEL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
5
Ten hub studs (1)
Inner wheel (2)
a
Put on wheel lift truck.
b
Raise wheel lift truck and put in position.
c
Aline holes in wheel with ten hub studs
and push into place.
d
Lower wheel lift truck.
CAUTION
Always tighten the inner nuts 50 foot pounds (68 N.m) more than the outer nuts and never let the outer nuts
get below 400 foot pounds (542 N.m).
6
Ten wheel studs (3)
a
Screw on and alternately tighten using
13/16-inch, 3/4-inch drive square
socket and hinged handle.
b
Tighten to 450 to 500 ft lbs (610 to
678 N.m) using 13/16-inch, 3/4-inch
square socket and hinged handle and
0 to 600 ft lbs (0 to 814 N.m)
torque wrench.
7
Ten wheel studs (3)
Outer wheel (4)
a
Put on wheel truck.
b
Raise wheel lift truck and put in position.
c
Aline holes in wheel with ten wheel studs
and push into place.
d
Lower wheel lift truck.
8
Ten lug nuts (5)
a
Screw on and alternately tighten using
1 1/2-inch, 3/4-inch drive socket and
hinged handle.
b
Tighten to 400 to 450 ft lbs (542 to
610 N.m) using 1 1/2-inch, 3/4-inch
drive socket and hinged handle and 0 to
600 ft lbs (0 to 814 N.m) torque
wrench.
2-1174
