TM 5-3805-254-20-2
CHASSIS 90-DEGREE ELBOW TO REAR REAR QUICK RELEASE VALVE HOSE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
2
Rear rear quick
Line nut (2),
a
Using 3/4-inch open-end wrench, un-
release valve (4)
90-degree elbow (1),
screw and take off.
and adapter (4.1)
b
Take out airhose.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-424).
3
Airhose (3)
Clean using liquid detergent and wiping rag.
INSPECTION/REPLACEM ENT
NOTE
Replace damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-424).
4
Airhose (3)
Check for cracks, breaks, chafing, or
hardness.
5
All threaded parts
Look for damaged threads or rounded
heads.
INSTALLATION
CAUTION
Antiseizing tape must be used on all pipe threads to provide a good seal and to prevent threaded parts from
seizing.
NOTE
For more information on how to use antiseizing tape, go to General Maintenance Instructions (page 2-424).
6
Rear rear quick
90-degree elbow (1)
Wrap pipe threads with antiseizing tape.
release valve (4)
and adapter (4.1)
Change 1 2-1158
