TM 5-3805-254-20-2
CHASSIS T-FITTING TO CHASSIS 90-DEGREE ELBOW HOSE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
4
Airhose (5)
a
Check for cracks, breaks, chafing, or
hardness.
b
Look for excessive rust or corrosion.
5
All threaded parts
Look for damaged threads or rounded
heads.
INSTALLATION
CAUTION
Antiseizing tape must be used on all pipe threads to provide a good seal and to prevent threaded parts from
seizing.
NOTE
For more information on how to use antiseizing tape, go to General Maintenance Instructions (page 2-424).
8
Chassis 90-degree
Fitting (3)
Wrap pipe threads with antiseizing tape.
elbow (6)
7
Fitting (3) and
Screw on and tighten using 3/4-inch and
line nut (4)
11/16-inch open-end wrenches.
8
Chassis
45-degree elbow (1)
Wrap pipe threads with antiseizing tape.
T-fitting (7)
9
45-degree elbow (1)
Screw on and tighten using 3/4-inch open-
and line nut (2)
end wrench.
TASK ENDS HERE
Change 1 2-1153
