TM 5-3805-254-20-2
CHASSIS T-FITTING TO CHASSIS 90-DEGREE ELBOW HOSE - CONTINUED
INITIAL SETUP
Tools
Personnel Required
Goggles, safety
One
Wrench, open-end, 11/16-inch
Wrench, open-end, 3/4-inch
Equipment Condition
Materials/Parts
Airbrake system drained (page 2-1034).
Detergent, liquid, GP (item 7, appendix C)
Rags, wiping (item 15, appendix C)
Tape, antiseizing (item 22, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Safety goggles must be worn when working under truck to prevent eye injury.
1
Chassis T-fitting (7)
Line nut (2) and
Using 3/4-inch open-end wrench, unscrew
45-degree elbow (1)
and take off.
2
Chassis 90-degree
Line nut (4), airhose
a
Using 3/4-inch and 11/16-inch open-
(6)
(5), and fitting (3)
end wrenches, unscrew and take off.
b
Take out airhose.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-424).
3
Airhose (5)
Clean using liquid detergent and wiping rag.
INSPECTION/REPLACEMENT
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-424).
Change 1 2-1152
