TM 5-3805-254-20-2
CHASSIS 90-DEGREE ELBOW
This task covers:
a
Removal (page 2-1151.0)
b
Installation (page 2-1151.0)
INITIAL SETUP
Equipment Conditions
Materials/Parts
Chassis T-fitting to chassis 90-degree elbow hose
Lockwasher, elbow
disconnected (page 2-1151.4).
Chassis 90-degree elbow to rear rear quick re-
Personnel Required
lease valve hose (page 2-1157).
One
Tools/Test Equipment
Goggles, safety
Wrench, box-end, 7/16-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Safety goggles must be worn when working under truck to prevent eye injury.
1
Left frame rail (1)
Screw (2) and
a
Using 7/16-inch box-end wrench, unscrew, and
lockwasher (3)
take off.
b
Get rid of lockwasher.
2
Chassis 90-degree
Take off.
elbow (4)
INSTALLATION
3
Left frame rail (1)
Chassis 90-degree
Put in place.
elbow (4)
4
Screw (2) and new
Screw in and tighten using 7/16-inch box-end
lockwasher (3)
wrench.
Change 1 2-1151.0
