TM 5-3805-254-20-2
CHASSIS T-FITTING
This task covers:
a
Removal (page 2-1151.2)
b
Installation (page 2-1151.2)
INITIAL SETUP
Equipment Conditions
Materials/Parts
Chassis T-fitting to front rear quick release valve
Lockwasher, T-fitting
hose disconnected (page 2-1146).
Chassis T-fitting to double check valve hose dis-
Personnel Required
connected (page 2-1143).
Chassis T-fitting to chassis 90-degree elbow hose
One
disconnected (page 2-1152)
Tools/Test Equipment
Goggles, safety
Wrench, box-end, 7/16-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Safety goggles must be worn when working under truck to prevent eye injury.
1
Left frame rail (1)
Screw (2) and
a
Using 7/16-inch box-end wrench, unscrew, and
lockwasher (3)
take off.
b
Get rid of lockwasher.
2
Spacer (4) and
Take off.
chassis T-fitting (5)
INSTALLATION
3
Left frame rail (1)
Spacer (4) and
Put in place.
chassis T-fitting (5)
4
Screw (2) and new
Screw in and tighten using 7/16-inch box-end
lockwasher (3)
wrench.
Change 1 2-1151.2
