TM 5-3805-25420-2
FRONT HUB AND BRAKEDRUM ASSEMBLY AND WHEEL BEARINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
26
Front hub (2)
Inner bearing
a
Position rear hub on wood blocks.
cup (4)
b
Using puller, pull out.
c
Get rid of.
27
New inner bearing
a
Position level and square.
cup (4)
b
Drive in until flush with top of front hub
using wood block and 3-pound cross-
peen hammer.
c
Seat completely by tapping on alternate
sides using 3-pound cross-peen ham-
mer and brass driftpin punch.
Make sure inner bearing cup Is flush
with machined surface inside front
hub.
28
Outer bearing
a
Position rear hub on wood blocks.
cup (5)
b
Using puller, pull out.
c
Get rid of.
29
New outer bearing
a
Position level and square.
cup (5)
b
Drive in until flush with top of front hub
using wood block and 3-pound cross-
peen hammer.
c
Seat completely by tapping on alternate
sides using 3-pound cross-peen ham-
mer and brass driftpin punch.
Make sure outer bearing cup is flush
with machined surface inside front
hub.
TA244441
2-1183
