TM 5-3805-254-20-2
HOOD - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Assistance is needed to support hood panel to prevent falling and causing personal injury.
1.
Right hood rest (1)
Screw (2) and self-
a.
Using 1/2-inch drive, 7/16-inch
locking nut (3)
socket, ratchet handle, and 7/16-inch
box-end wrench, unscrew and take off.
b.
Get rid of self-locking nut.
c.
Place right side hood panel on top of left
hood panel.
2.
Center hood rod
Two screws (5) and
a.
Using number three cross-tip screw-
retainer (4)
two self-locking
driver and 1/2-inch open-end wrench,
nuts (6)
unscrew and take off.
b.
Get rid of self-locking nuts.
c.
With two assistants, close right side
hood panel.
3.
Left hood rest (7)
Screw (8) and self-
a.
Using 1/2-inch drive, 7/16-inch
locking nut (9)
socket, ratchet handle, and 7/16-inch
box-end wrench, unscrew and take off.
b.
Get rid of self-locking nut.
c.
Place left side hood panel on top of right
side hood panel.
4.
Center hood rod
Two screws (10) and
a.
Using number three cross-tip screw-
retainer (4)
two self-locking
driver and 1/2-inch open-end wrench,
nuts (11)
unscrew and take off.
b.
Get rid of self-locking nuts.
c.
With two assistants, close left side hood
panel.
2-1252
