TM 5-3805-254-20-2
PINTLE HOOK - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
WARNING
Due to excessive weight, assistance will be needed to lift and remove pintle hook
assembly from rear chassis cross-member. Serious injury to personnel could result.
Safety goggles must be worn when working under truck to prevent injury.
1.
Rear chassis
Pintle Hook (5)
With assistance, put in place.
cross-member (1)
2.
Four screws (2),
a.
With assistance, aline screws in pintle
four nuts (3),
hook (5) and rear chassis cross-
and four new
member (1).
lockwashers (4)
b.
Screw nuts on screws and torque to 250
ft lb (281 N•m) using 1/2-inch drive
6-inch extension, 1 1/8-inch socket,
torque wrench, 0 to 250 ft lb (0 to 420
N•m) and 1 1/8-inch box-end wrench.
NOTE
FOLLOW ON MAINTENANCE: Disengage parking brake (TM 5-3805-254-10)
TASK ENDS HERE
TA244480
2-1249(2-1250 blank)
