TM 5-3805-254-20-2
HOOD - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
WARNING
Due to excessive weight, assistance is needed to prevent personal injury when lifting
heavy parts.
30.
Center hood hinge
Center hood rod
Put on.
pin (1)
retainer (2)
31.
Cowl and radiator
Hood assembly (4)
With two assistants, place in position and
shell (3)
aline boltholes.
WARNING
Assistance is needed to support hood panel to prevent falling and causing personal injury.
32.
Left side center
Two screws (5)
a.
Place left side hood panel on top of right
hood rod
and two new self-
side hood panel.
retainer (2)
locking nuts (6)
b.
Screw in and tighten using number three
cross-tip screwdriver and 1/2-inch
open-end wrench.
33.
Hood rest (7)
Screw (8) and new
a.
With two assistants, support hood in
self-locking nut (9)
open position.
b.
Screw in and tighten using 1/2-inch
drive, 7/16-inch socket, ratchet
handle, and 7/16-inch box-end
wrench.
c.
With two assistants, close left side hood
panel.
34.
Right side center
Two screws (11) and
a.
Place right side hood panel on top of left
hood rod
two new self-locking
side hood panel.
retainer (10)
nuts (12)
b.
Screw in and tighten using number three
cross-tip screwdriver and 1/2-inch
open-end wrench.
2-1260
