TM 5-3805-254-20-2
PASSENGER SEAT
This task covers:
a.
Removal (page 2-1272)
d.
Assembly (page 2-1274)
b.
Inspection/Replacement (page 2-1272)
e.
Installation (page 2-1274)
c.
Disassembly (page 2-1273)
INITIAL SETUP
Tools
Personnel Required
Handle, ratchet, 1/2-inch drive
One
Screwdriver, cross-tip, number two
Screwdriver, flat-tip, 1/4-inch
Equipment Condition
Socket, 9/16-inch, 1/2-inch drive
Staple gun, 3/8-inch capacity
Right cab door opened (page 2-424).
Materials/Parts
Lockwasher, seat frame to heater box
cover (four required)
Staples, 3/8-inch (as required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Seat frame (1)
Seat cushion (2)
Lift up and take off.
2.
Seat frame (1) to
Four screws (4),
a.
Using 1/2-inch drive, 9/16 inch socket
heater box (3)
four lockwashers
and ratchet handle, unscrew and take
(5), and four flat
out.
washers (6)
b.
Get rid of lockwashers.
3.
Heater box (3)
Seat frame (1)
Take out.
4.
Seat frame (1)
Back cushion (7) and
a.
Using number two cross-tip screw-
four screws (8)
driver, unscrew and take out.
b.
Take off back cushion.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions
(page 2-424).
5.
Seat frame (1)
Look for cracks, breaks on bends.
If damage, replace.
2-1272