ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY
9.
Back cushion support
Cover (2), and back
Put cover on back cushion.
(1)
cushion (3)
10.
Back cushion (3)
Back cushion support
Using staple gun and 3/8-inch staples,
(1), cover (2) and
attach cover to back cushion support.
staples (4).
11.
Seat cushion support
Cover (6) and seat
Put cover on seat cushion.
(5)
cushion (7)
12.
Seat cushion (7)
Seat cushion support
Using staple gun and 3/4-inch staples,
(5), cover (6) and
attach cover to seat cushion support.
staples (8).
INSTALLATION
13.
Seat frame (9)
Back cushion (3) and
a.
Put back cushion in place.
four screws (10)
b.
Screw in and tighten using number two
cross-tip screwdriver.
14.
Heater box (11)
Seat frame (9)
Put in place.
15.
Seat frame (9) to
Four screws (12),
Screw in and tighten using 1/2-inch drive,
heater box (11)
four new lockwashers
9/16 socket and ratchet handle.
(13) and four flat
washers (14)
16.
Seat frame (9)
Seat cushion (7)
Put in position and push down until cushion
snaps into place.
NOTE
FOLLOW-ON MAINTENANCE: Close right cab door (page 2-424).
TASK ENDS HERE
TA244497
2-1274
