RESERVOR-TO-PUMP SUCTION HOSE AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
19. Hose (1)
Clamp (2
a. Put in place.
b. Screw on and tighten using 1/4-inch
flat-tip screwdriver.
20. Nipple (3)
Hose (1)
Put on.
21. Hose (1)
Clamp (4)
a. Put in place.
b. Screw on and tighten using 1/4-inch
flat-tip screwdriver.
22. Reservoir (5)
Valve (6)
Turn counterclockwise to open.
23.
Cap (7)
Turn counterclockwise and take off.
24.
Filler neck (8)
Fill with lubricating oil (LO 5-3805-254-12)
until sight glass (10) is full.
25.
Dump body (9)
a. Raise completely, than lower completely
(page 2-424).
b. Repeat steps 24 and 25 until sight glass
(10) is full.
26. Reservoir (5)
Cap (7)
Put in place and turn clockwise.
TA244581
TASK ENDS HERE
2-1394
