TM 5-3805-254-20-2
RESERVOIR-TO-PUMP SUCTION HOSE AND FITTINGS
This task covers:
a. Removal (page 2-1390)
c. Inspection/Replacement (page 2-1392)
b. Cleaning (page 2-1392)
d. Installation (page 2-1393)
INITIAL SETUP
Tools
Materials/Parts - Continued
Brush, cleaning
Solvent, drycleaning (item 19, appendix C)
Container, 6-gallon
Tape, antiseizing (item 22, appendix C)
Gloves, safety
Goggles, safety
Personnel Required
Gun, blow, air
Hose, air assembly
One
Screwdriver, flat-tip, 1/4-inch
Wrench, pipe, 18-inch (two required)
References
LO 5-3805-254-12 (Lubrication Order)
Materials/Parts
Detergent, liquid, GP (item 7, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Do not drain hydraulic oil when hot. Hot oil could burn you.
1. Reservoir (1)
Valve (2)
Turn clockwise to close.
2. Hose (3)
Clamp (4)
a. Place 6-gallon container underneath.
b. Using 1/4-inch flat-tip screwdriver,
unscrew and take off.
3. Nipple (5)
Hose (3)
a. Take off.
b. Allow oil to drain.
c. Get rid of drained oil.
4. Hose (3)
Clamp (6)
a. Place 6-gallon container underneath.
b. Using 1/4-inch flat-tip screwdriver,
unscrew and take off.
2-1390
