TM 5-3805-254-20-2
PUMP-TO-VALVE PRESSURE HOSE AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
9. Clamp (11)
Two nuts (12) and
a. Using 7/16-inch box-end wrench, un-
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-424).
6.
Elbows (1 and 4)
Using drycleaning solvent and cleaning
and bushing (5)
brush, clean thoroughly.
7.
Hose (2)
Using liquid detergent, cleaning brush, and
water, clean thoroughly.
WARNING
Particles blown by compressed air are hazardous. Make certain the airstream is directed away from user
and other personnel in the area. Compressed air used for cleaning purposes shall not exceed 30 psi (207
kPa). User must wear safety goggles or face shield to prevent injury to personnel.
8.
All parts
Using blow gun and air hose assembly, blow
dry.
TA244577
2-1387
