TM 5-3805-254-20-2
VALVE-TO-RESERVOIR RETURN HOSE AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING - CONTINUED
WARNING
Particles blown by compressed air are hazardous. Make certain the airstream is directed away from user
and other personnel in the area. Compressed air used for cleaning purposes shall not exceed 30 psi (207
kPa). User must wear safety goggles or face shield to prevent injury to personnel.
7
All parts
Using blow gun and air hose assembly, blow
dry.
INSPECTION/REPLACEMENT
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-424).
8
Elbow (1) and
Look for cracks, bends, or dents.
bushing (2)
9
Hose (3)
Look for cracks, gouges, or worn areas.
10
All threaded parts
Look for damaged threads or rounded
heads.
INSTALLATION
11 Valve (4)
Bushing (2)
a
Wrap pipe threads with antiseizing tape
(page 2-424).
b
Screw in and tighten using 1 5/8-inch
box-end wrench.
12 Bushing (2)
Elbow (1)
a
Wrap pipe threads with antiseizing tape
(page 2-424).
b
Screw in and tighten using 1 1/2-inch
and 1 5/8-inch open-end wrenches.
13 Elbow (1)
Hose (3)
a
Wrap pipe threads with antiseizing tape
(page 2-424).
b
Screw in and tighten using 1 3/8-inch
and 1 1/2-inch open-end wrenches.
2-1398
