TM 5-3805-254-20-2
VALVE-TO-CYLINDER PRESSURE HOSE AND FITTINGS
This task covers:
a
Removal (page 2-1400)
c
Inspection/Replacement (page 2-1404)
b
Cleaning (page 2-1403)
d
Installation (page 2-1404)
INITIAL SETUP
Tools
Materials/Parts - Continued
Brush, cleaning
Tape, antiseizing (item 22, appendix C)
Container, 6-gallon
Gloves, safety
Personnel Required
Goggles, safety
Gun, blow, air
One
Hose, air assembly
Wrench, box-end, 1 3/8-inch
Equipment Condition
Wrench, open-end, 1 1/2-inch
Wrench, pipe, 18-inch
Dump body raised and secured (page 2-424).
Materials/Parts
References
Detergent, liquid, GP (item 7,
LO 53805-254-12 (Lubrication Order)
appendix C)
Oil, lubricating, OEIHDO/30 (item 14,
appendix C)
Solvent, drycleaning (item 19, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Do not drain hot hydraulic oil
Hot oil could burn you.
1
Union (1)
Hose (2)
a
Place 6-gallon container underneath.
b
Using 1 318-inch and 1 1/2-inch open-
end wrenches, unscrew and take out.
c
Allow oil to drain.
d
Get rid of drained oil (page 2-424).
2
Elbow (3)
Union (1)
Using 1 1/2-inch open-end wrench and 18-
inch pipe wrench, unscrew and take out.
2-1400
