TM 5-3805-254-20-2
TRANSMISSION OIL PRESSURE GAGE LINE AND FITTINGS
This task covers:
a.
Removal (page 2-1450)
c.
Inspection/Replacement (page 2-1457)
b.
Cleaning (page 2-1457)
d.
Installation (page 2-1458)
INITIAL SETUP
Tools
Materials/Parts
Extension, 10-inch, 112-inch drive
Detergent, liquid, GP (item 7, appendix C)
Goggles, safety
Tags, marker (item 21, appendix C)
Gun, blow, air
Tape, antiseizing (item 22, appendix C)
Handle, ratchet, 112-inch drive
Lockwasher, clamp (three required)
Hose, air, assembly
Screwdriver, flat-tip, 3/16-inch
Personnel Required
Socket, deep, 1 1/8 inch, 1/2-inch
drive
Two
Wrench, open-end, 7/16-inch (two
required)
Equipment Condition
Wrench, open-end, 1/2-inch
Wrench, open-end, 9/16-inch (two
Left side cab door opened (page 2-424).
required)
Air cleaner housing removed (page 2-452).
Wrench, open-end, 3/4-inch
Upper center instrument panel opened
Wrench, open-end, 1-inch
(page 2-424).
Lower center instrument panel opened
(page 2-424).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
CAUTION
Use care when working behind lower center instrument panel to prevent breaking or disconnecting wires.
NOTE
Tag all light sockets, lines, wires, and cables before removing for correct identification when installing.
For more information on how to tag parts, go to General Maintenance Instructions {page 2-424).
2-1450
