TM 5-3805-254-20-2
TRANSMISSION OIL PRESSURE GAGE LINE AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
17. Bulkhead
45-degree elbow (2)
Using 7/16-inch open-end wrench, un-
fitting (1)
screw and take out.
NOTE
Assistance will be required to perform steps 18 and 19.
18. Bulkhead fitting (1)
Nut (4)
Using 1-inch open-end wrench, hold nut
on engine side of
from turning.
firewall (3)
19. Bulkhead fitting (1)
Nut (6) and
Using 1/2-inch drive, 1 1/8-inch deep
on driver’s side of
flat washer (7)
socket, 10-inch extension, and ratchet
TA244620
2-1454
