TM 5-3805-254-20-2
FUEL PRESSURE GAGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
Line (2)
Using two 9116-inch open-end wrenches,
2
Elbow (1)
unscrew and take off.
Elbow (1)
Using 9/16-inch open-end wrench, un-
3
Gage (3)
screw and take off.
Two nuts (4) and
a
Hold gage.
4
two lockwashers (5)
b
Using 318-inch open-end wrench, un-
screw and take off.
c
Get rid of lockwashers.
Mounting bracket (6)
Take off.
5.
6
Right instrument
Gage (3)
Take out.
panel (7)
INSPECTION/REPLACEMENT
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions
(page 2-424).
7.
Gage (3)
a
Look for cracks or dents.
b
Check to see if gage is readable.
Mounting bracket (6)
Look for cracks, bends, or breaks.
9.
All threaded parts
Look for damaged threads or rounded
heads.
INSTALLATION
CAUTION
Use care when working behind right instrument panel to prevent breaking or disconnecting wires.
2-1476
