TM 5-3805-254-20-2
FUEL PRESSURE GAGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
10
Gage (3)
Wrap pipe threads with antiseizing tape
(page 2-424).
11 Right instrument
Gage (3)
Put in and hold.
panel (7)
Position as shown.
12 Gage (3)
Mounting bracket (6)
Put on.
13 Gage (3)
Two new lockwashers
Screw on and tighten using 3/8-inch open-
(5) and two nuts (4)
end wrench.
NOTE
Position elbow so that male threads are pointing toward hinge in instrument panel.
14
Elbow (1)
Screw on and tighten using 9/16-inch open-
end wrench.
Position as shown.
15 Elbow (1)
Line (2)
Screw on and tighten using two 9/16-inch
open-end wrenches.
16 Gage (3)
Light socket (8)
Push in.
TA244639
2-1477
