TM 5-3805-254-34
5-3.
STARTER MOTOR REPAIR (Con’t).
12. Install three screws (63) on holder assembly (62).
13. Install insulator (60), washer (59), new lockwasher (58), and nut (57) on ground terminal (61).
14. Install four springs (53) on end cap (1) with four
screws (54).
15. Position eight brushes (13) In brush holders (55).
16. Install four brush leads (52) on brackets (56) with six
screws (51).
TA703719
5-26
