TM 5-3805-254-34
5-3.
STARTER MOTOR REPAIR (Con’t).
25. Install washer (40) in boot (39).
26. Install boot (39) on plunger (33). Push boot down so
collar (42) on boot fits into groove (41).
27. Install retainer (38), spring (37), and retainer (36) on
boot (39) with retaining ring (35).
28. Install new oil seal (32) and new gasket (31) on lever
housing (3).
29. Position shift lever (30) in lever housing (3) and
Install plunger (33) assembly with new locknut (34).
30. Install shift lever shaft (24) in lever housing (3).
31. Install new small preformed packing (25) and new large preforrned packing (23) on shift lever shaft (24).
32. Install new retaining ring (26) on shift lever shaft (24).
33. Position new gasket (27) and starter drive (28) on lever housing (3).
34. Aline match-marks on drive housing (6) and lever housing (3). Install drive housing on lever housing with short screw
(29) and five long screws (22).
TA703721
5-28
