TM 5-3805-254-34
5-4.
STARTER MOTOR END PLAY ADJUSTMENT (Con’t).
CAUTION
Holding switch to ON for more than 30 seconds will damage switch. Hold switch to ON only long
enough to drive clutch motor drive gear against starter housing collar.
5.
Hold switch (18) to ON until solenoid switch (6) pushes clutch motor drive gear (21) against starter housing collar
(15).
6.
Push clutch motor drive gear (21) away from starter housing collar (15) and try to slip 0.040-inch feeler gage
between clutch motor drive gear and starter housing collar. if gage slips between clutch motor drive gear and
starter housing collar, set switch (18) to OFF.
NOTE
Perform step 7 only If feeler gage did not fit between clutch motor drive gear and starter housing
collar.
7.
Position 0.030-inch feeler gage between clutch motor drive gear (21) and starter housing collar (15).
TA703726
5-33
