TM 5-3805-254-34
5-6.
ENGINE, TRANSMISSION, BODY, AND CHASSIS WIRING HARNESS REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Battery cables disconnected (see TM 5-3805-
• Marker tags (Item 25, Appendix B)
254-20).
Tools/Test Equipment:
• General mechanic's tool kit
• Field automotive shop set
a.
REMOVAL
1.
Refer to wiring diagram (see page FP-1) for routing information and circuit numbers of wiring harness to be
removed.
NOTE
• Tag all wires for Installation (see paragraph 1-16).
• Tags must be transferred to wires of new wiring harness to assist in Installation.
2.
Refer to applicable procedure for specific component for removal of wires from components.
3.
Note location to assist in Installation and remove all tie wraps, clamps, or other wiring harness retaining devices.
b.
INSTALLATION
NOTE
Refer to electrical schematic (see page FP-1) for assistance.
1.
Route wiring harness the same location as removed.
2.
Install retaining devices, clamps, and tie wraps as noted in removal.
3.
Connect wiring harness wires to components as tagged.
4.
Remove tags.
FOLLOW-ON TASKS:
•
Connect battery cables (see TM 5-3805-254-20).
5-38
