TM 5-3805-254-34
5-4.
STARTER MOTOR END PLAY ADJUSTMENT.
This Task Covers: Adjustment
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Starter motor removed (see TM 5-3805-254-20).
• One gasket
Tools/Test Equipment:
General Safety Instructions:
• Automotive fuel and electrical system repair tool kit
• Remove all jewelry.
• Automotive fuel and electrical system shop set
ADJUSTMENT
WARNING
Remove all Jewelry such as dog tags, rings, bracelets, etc. If jewelry contacts any hot electrical
terminal, a direct short will result, causing serious Injury or death to personnel.
1.
Connect one end of cable (5) on positive terminal (3) of power supply (4) and connect other end of cable on Batt.
terminal (7) of solenoid switch (6).
2.
Connect one end of cable (1) on negative terminal (2) of power supply (4) and connect other end of cable on
housing (10).
3.
Connect one end of cable (9) on Mot. terminal (8) of solenoid switch (6) and connect other end of cable on
housing (10).
4.
Set line switch (14) on power supply (4) to ON. Turn two current knobs (12) clockwise Y turn. Turn two voltage
knobs (13) clockwise until voltage Indicator (11) shows 24 volts.
TA703725
5-32
