TM 5-3805-254-34
6-2.
AUXILIARY TRANSMISSION REPAIR (Con’t).
33.
Drive mainshaft (49) forward until retainer ring
groove In mainshaft Is exposed. Install new
34.
Install new thrustwasher (55) over rear of mainshaft (49) with flat surface of thrustwasher against gear.
35.
Install new ball bearing (56) over rear of mainshaft (49) with snapring of ball bearing facing away from case (8).
36.
Drive ball bearing (56) into case (8) until snapring is fully seated against case. Remove aluminum or brass plate.
37.
Install washer (50) and speedometer drive gear (51) to rear of mainshaft (49).
38.
Install bushing (48), gear (47), and flange (46) in bearing retainer (38) with two new lockwashers (45) and screws
(44).
6-22
