TM 5-3805-254-34
6-2.
AUXILIARY TRANSMISSION REPAIR (Con’t).
56.
With shift bar (3) in neutral position, install new Interlock (22) into housing (6). Ensure that interlock seats in
neutral notch of shift bar.
57.
Apply thin coat of grease to surface of shaft (1) and install shaft with notches facing threaded hole in housing (6).
58.
Install stop sleeve (14) and shift fork (15) to shaft (1) as shaft is installed toward rear of housing (6).
59.
Install screw (16) to shift fork (15). Torque screw to 40-50 lb.-ft. (54-68 N-m).
60.
Install new ball (12), new plunger (11), new
spring (10), and retainer (9) in housing (6).
TA703756
6-26
