TM 5-3805-254-34
6-3.
AUXILIARY TRANSMISSION TOP COVER MAINTENANCE.
This Task Covers:
a. Removal
d.
Assembly
b. Disassembly
e.
Installation
c. Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Auxiliary transmission linkage disconnected (see
• Grease (Item 10, Appendix B)
paragraph 6-4).
• Sealant compound (Item 19, Appendix B)
Tools/Test Equipment:
• Dry cleaning solvent (Item 23, Appendix B)
• General mechanic's tool kit
• Three parts kits
• Field automotive shop set
General Safety Instructions:
• Dry cleaning solvent is flammable and must not be used near open flame. Use only In a well-ventilated area.
a.
REMOVAL
NOTE
Auxiliary transmission Is In neutral when
shaft and shift bar protrude evenly from
housing.
1.
Using shaft (7) and shift bar (6), shift auxiliary
transmission into neutral.
2.
Remove ten bolts (1), washers (2), housing (3) ,
and gasket (4) from top of case (5). Discard
gasket.
TA703758
6-28
